The problems with traditional liquid preparation:
1. The traditional manual ratio of cutting fluid concentration is unstable;
2. Workers are difficult to control and management costs are high;
3. Excessive concentration of manually proportioned cutting fluid causes waste of the original solution;
4. Low concentration can lead to tool wear and a decrease in product accuracy;
5. Artificial liquid preparation can easily spill onto the ground, causing safety hazards and workshop environmental pollution.
Solution
The use of an intelligent cutting fluid dispenser on machine tools can effectively solve the above problems. The equipment is controlled by PLC, with accurate fluid dispensing and a built-in 120-liter storage tank, making it easy to access at any time. Implemented functions such as accurate concentration ratio, intelligent start stop, and automatic liquid replenishment!
1. Intelligent liquid dispensing accurately and quantitatively ensures stable concentration and reduces waste of raw materials;
2. Intelligent start stop, PLC program control, intelligent liquid dispensing;
3. Automatically sensing the liquid level of the proportioning and automatically starting and stopping, without the need for manual operation;
4. Implement monitoring of raw materials and water sources, with automatic alarm prompts for liquid shortages;
5. Mobile body, easy to install, can be used by plugging in and connecting;
6. Intelligent data storage, the usage amount of each mixing solution and water will be automatically saved for later traceability.
Intelligent liquid dispenser equipment parameters:
1. Equipment size: 950 * 600 * 1580mm;
2. Processing flow rate: 1000 liters/hour;
3. Water tank capacity: 120 liters;
4. Concentration range: 0-50%;
5. Working pressure: 0.2-0.6 MPa;
6. Working voltage: AC220V;
7. Equipment power: 1800W;
8. Operating temperature: 0-50 ℃.
Product features
The equipment is controlled by PLC, with accurate liquid dispensing and comes with a 120-liter storage tank, making it easy to access at any time. Implemented functions such as accurate concentration ratio, intelligent start stop, and automatic liquid replenishment!
1. Intelligent liquid dispensing accurately and quantitatively ensures stable concentration and reduces waste of raw materials;
2. Intelligent start stop, PLC program control, intelligent liquid dispensing;
3. Automatically sensing the liquid level of the proportioning and automatically starting and stopping, without the need for manual operation;
4. Implement monitoring of raw materials and water sources, with automatic alarm prompts for liquid shortages;
5. Mobile body, easy to install, can be used by plugging in and connecting;
6. Intelligent data storage, the usage amount of each mixing solution and water will be automatically saved for later traceability.
Company Profile
Di'angtianke is a one-stop intelligent purification equipment and solution provider for metal working fluids. The company has been continuously developing and improving new products according to market demand, helping machining enterprises solve problems such as cutting fluid use, maintenance, and waste liquid purification. The use of Di Ang Tian Ke's cutting fluid purification equipment can help enterprises extend the service life of cutting fluid, reduce operating costs, and improve production efficiency.
Enterprise Introduction
Guangzhou Di'angtianke Automation Equipment Co., Ltd. is located in Guangzhou and is a research and development manufacturer of one-stop purification production equipment for metal working fluids, as well as a provider of cutting fluid purification solutions. Since its establishment, the company has cooperated with over 1000 enterprises and exported its products to countries such as Japan, the Netherlands, Mexico, Romania, Indonesia, Vietnam, and Malaysia.
